To properly use the built-in Jump Starting feature on an Antigravity RE-START Battery (in the event the battery is ever over-discharged and puts itself into its SLEEP-MODE) you would do the following before attempting to use the RE-START button or this Remote.
- Make sure you turn off the Key to the Motorcycle/Powersport Vehicle and turn off all accessories on the bike such as USB devices, lights or other accessories. The reason is because your battery is severely over-discharged if the battery has gone into its SLEEP MODE, so you want to ensure the remaining power is available to be used to only start the vehicle and not be wasted on a light or something that can use a significant amount of the remaining battery energy.
Once the key and accessories are OFF on your vehicle, you’re ready to RE-START.
- Connect the remote’s SAE tip to the SAE tip of your existing battery charging harness.
- Flick the remote’s switch ON (up) then OFF (down). The battery is now reset.
- Disconnect the remote, and start your vehicle.
IMPORTANT: After the RE-START Battery has gone into its sleep mode, it is in a state of extreme over-discharge. You should fully recharge the battery again as soon as possible. You can use a standalone Charger, or Ride/drive the vehicle for at least 30 minutes to get an adequate recharge of the battery, or longer to fully recharge it.
For the Antigravity SAE Pigtail: CLICK HERE
